Philips HAIRCLIPPER Series 1000 Tondeuse cheveux - Manual (Page 8)

4 Put the adapter in the wall socket.
5 Wait a few seconds and then slide the on/off
switch to the ‘on’ position.
6 Move the appliance through the hair slowly.
- Start clipping at the highest setting of the comb
attachment and reduce the hair length setting
gradually.
- Write down the hair length settings you selected
to create a certain hairstyle as a reminder for
future clipping sessions.
- To clip in most effectively, move the appliance
against the hair growth direction.
- Since all hair does not grow in the same
direction, you need to move the appliance in
different directions (upwards, downwards and
across).
- Make overlapping passes over the head to ensure
that you cut all the hair that needs to be cut.
- Make sure that the flat part of the hair clipping
comb attachment is fully in contact with the scalp
to obtain an even cutting result.
- To achieve a good result with curly, sparse or long
hair, use a styling comb to guide the hair towards
the appliance.
7 Regularly remove cut hair from the comb
attachment.
If a lot of hair has accumulated in the comb
attachment, remove it from the appliance and blow
and/or shake the hair out of it.
English 8