Philips HAIRCLIPPER Series 1000 Tondeuse cheveux - Manual (Page 6)

2 Insert the appliance plug into the appliance.
3 Put the adapter in the wall socket.
, The charging light goes on to indicate that the
appliance is charging.
Note: The charging light does not change colour and
does not go out when the appliance is fully charged.
optimising the lifetime of the battery
- Discharge the battery completely twice a year by
letting the motor run until it stops.
- Remove the adapter from the wall socket when
the battery is fully charged.
- If you have not used the appliance for a long
time, recharge it for at least 12 hours.
Corded clipping
When the rechargeable battery is empty, you can
also run the appliance from the mains.
Do not run the appliance from the mains when the
battery is fully charged.
To use the hair clipper connected to the mains:
1 Switch off the hair clipper and connect it to
the mains.
2 Wait a few seconds and then switch on
the appliance.
English 6