Belkin F1U119 - Manual (Page 15)

11
Windows ® 95/98 (continued)
7. Next, you will see a box with
the following instructions.
Click “OK”.
8. Reboot your computer. This is a very important step!!! You must reboot.
Otherwise, the software will not initialize and you cannot continue
properly. Click “Yes”. If not, make sure you reboot your computer
before proceeding to the next step.
9. Add your printers. Click “Start”, select “Settings”, then select
“Printers”. Now, double-click on the “Add New Printer” icon and follow
the instructions.
IF YOUR PRINTER IS NOT LISTED - You have to add your printers
using the software that came with your printers. If this is the case, run
your printer setup program according to your printer manufacturer’s
instructions and SKIP DIRECTLY TO PAGE 13.
IF ALL YOUR PRINTERS ARE ALREADY INSTALLED - you do not have
to add printers anymore. SKIP DIRECTLY TO PAGE 13.
En
P73074/F1U119/AM/man.qxd 4/19/00 4:25 PM Page 11