Belkin F1U119 - Manual (Page 29)

25
Addendum: Disabling Bi-directional
Communication for HP Printer (continued)
To change the CMOS setting on Toshiba Laptops:
• From Windows
® 95/98 click on “Start”
• Go to “Programs”
• Select “Toshiba Utilities”
• You will have either the “TSETUP” or “HARDWARE SETUP” utility
• Reboot your system
For TSETUP:
• Under “Parallel Port” select “Standard”
• Reboot your system
For HARDWARE SETUP:
• Select “Hardware Options”
• Select “Parallel/Printer”
• Select “Standard Bi-directional”
• Click “OK”
• The machine will ask if you want to reboot. Select “Yes”
• Reboot your system
The bi-directional software for your printer has now been disabled. After
restarting Windows
® you should be able to print properly through your
printer sharing device. If you continue to have difficulty, please call Belkin
Components Technical Support at (310) 898-1100 ext. 2263.
En
P73074/F1U119/AM/man.qxd 4/19/00 4:25 PM Page 25