BT Freestyle 310 - Manual (Page 19)

Using the directory
You can store up to 100 entries in the directory. Each entry
contains a name and number. Names can be up to 15
characters long and numbers up to 24 digits.
Store an entry
1. Press to open the directory.
2. When storing the first entry:
The display shows
Empty
. Press Opt .
New entry
is displayed.
Press OK .
When storing further entries:
The first entry is displayed. Press
Opt .
New entry
is displayed.
Press OK .
3. Enter the phone number and press OK .
4. Enter the name and press Save .
Dial an entry
1. Press and scroll or to the entry you want to dial.
Or to search alphabetically, press the relevant keypad button,
e.g. for ‘Tom’, press
then scroll through the entries under T.
2. Press . The number is displayed and dialled.
19 Using the phone
Entering names
When entering a name, the characters
available for each key are displayed
when the relevant button is pressed.
Use the keypad letters to enter names,
e.g. to store TOM:
Press
once to enter T.
Press three times to enter O.
Press once to enter M.
Writing tips
Press Del to delete the last digit.
Press
to enter a space.
Press to switch between upper
and lower case letters and numbers.
Use , and to
enter other
punctuation characters.
Entering numbers
Make sure you enter the full telephone
number including the dialling code if
you subscribe to a Caller Display
service and want the name of your
caller displayed instead of the number.
To enter a pause within a telephone
number when storing a directory
entry, press and hold and a P will
be displayed.
BT Freestyle 310 – Issue 2 – Edition 01 – 08.01.06 – 7971
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]