BT Freestyle 310 - Manual (Page 44)

44 Base settings
BT Freestyle 310 – Issue 2 – Edition 01 – 08.01.06 – 7971
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
PBX access
If your switchboard requires a pause after the access code for
an outside line, you can program your BT Freestyle 310 to
automatically enter the pause. All the numbers in your directory
or entered into the keypad will need to prefixed with the access
code, e.g. 901977592222.
1. Press Menu . Scroll to Settings menu and press OK .
2. Scroll to
Setup base
and press OK .
3. Scroll to
PBX access
and press OK .
4. Enter the access number and press OK .
5. Press to return to standby.
Change PIN
Your BT Freestyle 310 has a security PIN code which you will
need to enter when changing some of the base settings.
The default setting is 0000. You may want to change this
to prevent unauthorised changes to your settings.
1. Press Menu . Scroll to Settings menu and press OK .
2. Scroll to
Setup base
and press OK .
3. Scroll to
Change PIN
and press OK .
4. Enter the current 4 digit PIN code and press OK .
If you change your PIN, please keep a
note of it somewhere safe. There is a
space on page 59 where you can write
it down.
For security when you enter each digit
of the PIN code it will be displayed as
an *.