Blue Rhino GWU501E - Manual (Page 18)

Replacing Pilot and Control Valve Series GWU501E, GWU511A, GWU512A LP Gas 606030 18
For assistance call 1.800.762.1142.
Step 16
A. Install the pilot supply tube to the new control valve, making sure it is tight. Do not over tighten.
B. Reinstall the gas line (rubber hose) to the new control valve making sure it is tight also.
C. Install the wire and nut from the pilot assembly to the back of the control valve. Should be finger tight plus a 1/4 turn.
D. Install the tip switch to the tip switch bracket.
E. Reinstall the control valve and pilot assembly in the valve housing.
To reassembly, follow these instructions in reverse and reassemble all parts to the heater in order.