Blue Rhino GWU501E - Manual (Page 2)

Replacing Pilot and Control Valve Series GWU501E, GWU511A, GWU512A LP Gas 606030 2
For assistance call 1.800.762.1142.
Tools required:
• # 8mm open end wrench
• # 9mm open end wrench
• # 10mm open end wrench
• # 12mm open end wrench
• # 17mm open end wrench
• 1/2” open wrench
• 5/8” open end wrench
• 3/4” open end wrench
• # 2 Phillips screw driver
• Heavy duty pipe cleaners
• Bottle brush
• Compressed air - canned or compressor with a hose
• Non-abrasive scouring pad
• Soft bristle brush
• Pliers
• Leak test solution: 1 part liquid soap and 3 parts water
1. Installation and repair should be done by a qualified service person.
2. Use only Blue Rhino Global Sourcing, LLC. factory authorized parts. The use of any part that is not factory
authorized can be dangerous. This will also void your warranty.
Contact 1.800.762.1142.
DANGERS and Cautions