Binatone 2300 - Manual (Page 8)

Binatone Help Line : 0845 345 9677 6
Installation and Set-up
1/ Choose a suitable site for the
base unit (see page 5)
2/ Connect the mains power lead
and the telephone line cord into the
base unit
Plug one end of the telephone line
cord into the jack on the back of the
base
(the other end will plug into the
telephone wall socket later)
3/ Plug the main s adaptor into your wall
socket. If you have one or more charger pods,
plug the mains adaptors accordingly
Make sure that the 230VAC, 50hz mains socket is switched OFF
when you plug the mains adapter into the socket.
4/ Connect the base unit to the telephone line
Insert the telephone line plug into the socket then
See the note
on page 5
See the note
on page 5
switch mains power back ON.
Make sure the mains socket is switched on —
the phone won’t work without electrical power