Binatone 2300 - Manual (Page 9)

Binatone Help Line : 0845 345 9677 7
Desk/Wall mount installation
To place the
CC2300 on a desk, connect
the stand to the bottom of the phone in the
slots near the rear of the base as shown below.
Desk Mount
Insert the rigid clips of the stand into the slots
on the bottom of the phone
(nearer the centre
of the base ). Press down firmly until the
flexible clips clicks into place.
To remove the stand, (1) pinch the flexible
clips, (2) pull back the stand, and then (3)
slide up and forward
as shown below.
To place the CC2300 on a wall, connect the
stand to the bottom of the phone in the slots
near the front of the base as shown below.
Wall Mount