Liebherr LTM 1070-4.2 - Manual (Page 11)

LTM 1070-4. 2
11
The fully automatic telescoping
system „TELEMATIK“
• Improvement of capacities at long
booms and large radii due to light-
weight telescoping system
• 1-stage hydraulic cylinder with
hydraulically operated drive pin
• Maintenance free telescoping
• Telescoping fully automatic
• Simple operation, supervision of
telescoping at the LICCON monitor
Powerful, long telescopic boom
and functional lattice extensions
The telescopic boom consists of the base section and 5 telescopic sections, which
can be comfortably and automatically extended and pinned to the requested length
by the thousand fold proven single cylinder telescoping system TELEMATIK.
• 50 m long telescopic boom
• 9.5 m – 16 m long double swing-away jib, attachable at 0°, 20°, 40° and 60°
• Hydraulic adjustment of the swing-away jib at full load from 0° to 60°
(optional), interpolation of capacities
• Rooster sheave, foldable sidewise
• 3.2 m long assembly jib, consisting of the swing-away adapter and
an additional set of sheeves or a hook traverse.
High capacities with full counterweight as well as
with partial counterweight offer a wide applica-
tion of operations
• High lateral stability due to the oval boom profile
• Optimized capacities due to the numerous extension variations
• Capacity 6.7 t at 50 m long telescopic boom
High capacities at the unpinned telescopic boom
• High telescopable capacities due to interpolation.
• Separate charts for holding of loads at unpinned telescopic lengths
• Display at LICCON monitor
High lifting capacities and flexible boom system
3,2 m long assembly jib
Holding capacity
Unpinned telescopic length
Telescopable capacity