Liebherr LTM 1070-4.2 - Manual (Page 16)

Liebherr-Werk Ehingen GmbH
Postfach 1361, 89582 Ehingen, Germany
 +49 7391 502-0, Fax +49 7391 502-33 99
www.liebherr.com, E-Mail: [email protected]
PN 189.00.E01.2009 The pictures contain also accessories and special equipment which are not included in the standard scope of delivery. Subject to modification
The new control generation - LICCON2
Colour monitor
The readability of the data on
the monitor of the LICCON2
control system in the crane
cab is enhanced by the colour
display. Warnings and crane
utilization are considerably
better recognized.
Supporting the crane
By use of the BTT the mobile crane
can be comfortably and safely sup-
ported on the outriggers. Engine start/
stop, speed regulation, electronic level
display and automatic support level-
ling are available as standard. Option-
ally also the supporting forces can be
displayed on the BTT.
The new generation of the Liebherr crane control offers
extended customer benefits and higher operational com-
fort by additional possibilities of use. The base for this is
the modern and future oriented control architecture with
components, which are optimized regarding the comput-
ing power as well as their capacities.
Touch-Displays
Below the joy sticks integrat-
ed in the armrests the touch
displays are installed, with
which the various operational
functions can be selected.
This are beside others the
drive and steering programs
of the chassis, the axle sus-
pension, the supporting of the
crane, the adjustment of the
working floodlights as well
as heater and air condition
controls.
Attaching and detach-
ing of the hook block
The BTT – Bluetooth terminal – offers
the crane driver the possibility to at-
tach the hook block to or detach it from
the front bumper within sight by remote
control of the hoist winch and the luff-
ing cylinder of the telescopic boom.
Wireless remote control (optional)