Liebherr LH 80 C Litronic - Manual (Page 10)

L0008.01
C 1
C
A 45
A 20
J
H
I
E
Q
20°
20°
45°
L
F max.
F 20
F 45
K
A
10 Special timber handling machines from Liebherr
L 524 - L 542
Log Grapple
Log Grapple
L 524 L 528 L 538 L 542
Geometry PK PK PK PK PK PK
A20 Discharge height at 20° mm 3,380 3,380 3,435 3,340 3,435 3,340
A45 Discharge height at 45° mm 2,895 2,895 2,950 2,835 2,950 2,835
C Max. grapple opening in loading position mm 1,795 1,795 1,795 2,325 1,795 2,325
C1 Max. grapple opening mm 2,075 2,075 2,075 2,580 2,075 2,580
E Max. height mm 5,790 5,790 5,845 6,100 5,845 6,100
F20 Reach at max. lifting height at 20° discharge mm 1,585 1,585 1,500 1,610 1,500 1,610
F45 Reach at max. lifting height at 45° discharge mm 1,275 1,275 1,185 1,255 1,185 1,255
F max. Max. reach mm 2,485 2,485 2,400 2,500 2,400 2,500
H Height above cab mm 3,200 3,200 3,250 3,250 3,250 3,250
I Manipulation height mm 4,240 4,240 4,295 4,375 4,295 4,375
J Ground clearance mm 460 460 490 490 490 490
K Wheelbase mm 2,850 2,850 2,975 2,975 2,975 2,975
L Overall length mm 7,760 7,760 7,980 8,110 7,980 8,110
Width over tyres mm 2,460 2,460 2,490 2,490 2,490 2,490
Q Grapple diameter m 2 1.3 1.3 1.3 1.8 1.3 1.8
Grapple width mm 1,600 1,600 1,600 1,600 1,600 1,600
Payload * kg 3,880 4,470 5,010 4,450 5,390 4,800
Operating weight * kg 11,800 12,450 13,460 13,860 13,860 14,260
Tyre sizes mm 17.5R25 L3 17.5R25 L3 20.5R25 L3 20.5R25 L3
* The figures shown include the above tyres, all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tyres and optional
equipment will change the operating weight and payload. (Tipping load, articulated at 40° according to ISO 14397-1)
PK = Parallel linkage with hydraulic quick-hitch