Liebherr L 586 - Manual (Page 10)

10 L 586
L0044.01
J
I
H
L
K
G
F
49º
D
C
B
A
E
45°
65°
Loading Bucket
STD HL STD HL STD HL
Cutting tool
Lift arm length
ft in
Bucket capacity according to ISO 7546 ** yd 3
Bucket width ft in
Specific material weight lb/yd 3
A Dumping height at max. lift height and 45° discharge ft in
B Dump-over height ft in
C Max. height of bucket bottom ft in
D Max. height of bucket pivot point ft in
E Max. operating height ft in
F Reach at max. lift height and 45° discharge ft in
G Digging depth ft in
H Height above cab ft in
I Height above exhaust ft in
J Ground clearance ft in
K Wheelbase ft in
L Overall length ft in
Turning circle radius over outside bucket edge ft in
Breakout force (SAE) lbf
Tipping load, straight * lb
Tipping load, articulated at 37° * lb
Operating weight * lb
Tire sizes 29.5R25 L5 29.5R25 L3
* The figures shown here are valid with tires above and include all lubricants, a full fuel tank, the ROPS/FOPS cab and the operator. Different tires
and optional equipment will change the operating weight and tipping load. (Tipping load, articulated at 37° according to ISO 14397-1)
** Actual bucket capacity may be approx. 10% larger than the calculation according to ISO 7546 standard. The degree to which the bucket can
be filled depends on the material – see page 13.
= Rock bucket with oblique base for quarrying applications
= Rehandling bucket
T
10’4”
7.2
11’2”
3,034
10’10”
13’7”
14’2”
15’3”
21’4”
4’7”
4”
12’3”
10’10”
1’11”
12’10”
32’7”
27’1”
52,830
50,221
45,040
69,181
T
11’4”
7.2
11’2”
2,697
12’3”
14’9”
15’7”
16’7”
22’10”
4’6”
4”
12’3”
10’10”
1’11”
12’10”
33’8”
27’9”
51,706
44,114
39,551
69,887
ROB
10’4”
7.2
11’2”
3,034
10’11”
13’7”
14’1”
15’3”
21’
4’6”
6”
12’4”
10’11”
1’11”
12’10”
32’8”
27’1”
52,830
50,023
44,853
71,838
ROB
11’4”
7.2
11’2”
2,697
12’3”
14’9”
15’8”
16’8”
22’4”
4’6”
6”
12’4”
10’11”
1’11”
12’10”
33’10”
27’9”
51,706
43,883
39,353
72,554
T
10’4”
7.9
11’2”
2,697
10’8”
13’7”
14’2”
15’3”
21’5”
4’8”
4”
12’3”
10’10”
1’11”
12’10”
32’8”
27’3”
50,582
48,633
43,607
69,996
T
11’4”
7.9
11’2”
2,360
12’
14’9”
15’7”
16’7”
22’11”
4’7”
4”
12’3”
10’10”
1’11”
12’10”
33’9”
27’11”
49,458
42,659
38,228
70,768
Dimensions
Z-bar linkage
STD = Standard lift arm length
HL = High Lift
ROB = Rock bucket with delta cutting edge, welded-on tooth
holder with add-on teeth and bolted intermediate sections
T = Welded-on tooth holder with add-on teeth