BT 3505 - Manual (Page 43)

43
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
Why time saver?
Time Saver can save you the cost
of a call when you want to ring in
to find out if you have new
messages.
If your answering machine answers
after 2 rings, you have new
messages. If you have no new
messages it will answer after 6 rings.
So if you hear a third ring, you can
hang up before you are connected,
saving you the cost of a call.
3. Press to delete it. The pre-recorded outgoing
message is played back and reinstated.
4. Press and hold to return to standby.
Answer delay
Answer delay sets the number of times your BT Synergy
3505 will ring before the answering machine picks up a
call. The default setting is 6 rings. You can change this
setting to 2-9 rings or time saver.
At the base:
1. Press and hold until the current setting is
announced, then release.
2. Press to scroll through the options, which are
announced with each press.
When you hear the setting you want, do not press any
button. The setting is announced again as confirmation.
Check answer delay setting
At the base:
1. Press and release . The current setting is announced
and displayed.
Skip
Skip
Skip
5
Using the answering machine
5675 BT Synergy 3505 UG [4] 11/11/03 4:15 PM Page 43