BT 3505 User Manual
Page 61
61
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
Help
Problems
Possible cause
You cannot link up
Is
flashing in the display? You may be out of
with the base station
range, move closer to the base.
Check that the base is connected to the mains power
and switched on.
Are the batteries low or flat? If so, charge the batteries
or replace them if necessary.
If using more than one base, check that you are
connected to the correct base. See page 29.
No ring on the handset
Check that the ringer volume is switched on, see page 24.
Check that the base is plugged into the phone socket
and that it is also connected to the mains power and
switched on.
Buzzing noise on my
Sometimes, your BT Synergy 3505 and other DECT GAP
radio, TV, computer
compatible handsets can interfere with other electrical
or hearing aid
equipment if placed too close. Try moving at least one
metre away from such appliances.
The handset is not
Check that the base is plugged into the mains socket
charging properly
and switched on
.
5675 BT Synergy 3505 UG [4] 11/11/03 4:21 PM Page 61