BT 3505 - Manual (Page 70)

70
BT Synergy 3505 – Edition 4 – 11.11.03 – 5675
General information
Dialling mode
1. Press then scroll to SETUP and press .
2. Scroll to DIALMODE and press .
3. Press or to select either TONE or PULSE and press to confirm.
Automatically insert a pause after access code
With some switchboards, you may be required to dial a pause after entering the
switchboard access code (e.g. 9) to enable you to get an outside line.
This feature automatically inserts a pause between the access code and the telephone
number you have entered in the phonebook. However, for this feature to work, you must
still enter the access code before the telephone number when storing the number in the
Phonebook.
1. Press then scroll to display SETUP and press .
2. Scroll to display PABX and press .
3. Scroll to PBX 1 and press to display PIN?
4. Enter the PIN (original code 0000) and press .
5. Enter the switchboard access code (e.g. 9) and press .
5675 BT Synergy 3505 UG [4] 11/11/03 4:21 PM Page 70