BT Hub Phone 1010 - Manual (Page 10)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
4. On the handset:
From idle mode:
Press Menu to access the menu.
Navigate through the menu using and until
Registration is highlighted.
Press OK , Register Handset is displayed.
Press OK , Base 1 is displayed.
Press to select the base unit number you want to
register to. Already used base units have a * sign on the
right of the base name.
Press OK , System PIN is displayed. While typing the
PIN code (0000), digits are displayed as asterisks. Press
Back/Clear to delete the last character or to go back
to previous menu if you have made a mistake.
Press OK to validate and start the registration. Base
search x is displayed where x is the base number.
Getting started 10
Hub Phone 1010 [3]DkBlue 13/4/06 5:44 pm Page 10