BT Hub Phone 1010 - Manual (Page 47)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
5. Press or to select ON or OFF then press OK .
SAVED is displayed.
6. Press Back repeatedly to return to the idle screen.
To switch out of range beeps On/Off
During a call, if the handset moves out of
communication range with the base you will hear a
warning beep to alert you to move closer to the base for
improved reception and to avoid being disconnected.
1. Press Menu to access the menu.
2. Press or to scroll and display HANDSET and
press OK .
3. Press or until BEEP TONES is displayed and
press OK .
4. Press or until OUT OF RANGE is displayed and
press OK .
5. Press or to select ON or OFF then press OK .
SAVED is displayed.
Handset settings 47
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 47