BT Hub Phone 1010 - Manual (Page 55)

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
To change the alarm melody
1. Press Menu to access the menu.
2. Press or to scroll and display TIME SETTINGS and
press OK .
3. ALARM is displayed, press OK to select.
4. ON/OFF is displayed, press or until SET
ALARM TONE is displayed and press OK to select.
5. Press or to scroll and select an alarm melody,
then press OK to save. ALARM TONE SAVED is
displayed.
To cancel an alarm setting
1. Press Menu to access the menu.
2. Press or to scroll and display TIME SETTINGS and
press OK .
3. ALARM is displayed, press OK to select.
4. ON/OFF is displayed, press OK to select.
You will hear a sample of each
melody as the
or button is
pressed.
Time settings 55
Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 55