Brother FAX 275 - Manual (Page 50)

36
C H A P T E R S I X
ADF (Automatic Document Feeder)
The automatic document feeder (ADF) can hold up to 10 pages, feeding
each one individually through the fax machine. Use standard (17 lb–24 lb)
paper when using the ADF; if you’re using heavier paper, feed each sheet
individually to prevent paper jams.
Resolution
Press Resolution (before you send the fax) to select the resolution for the
document you’re sending.
Standard—suitable for most typed documents.
Fine—good for small print; transmits a little slower than standard
resolution.
S. Fine (Super Fine)—good for small print or artwork; transmits slower than
fine resolution.
Photo—use when document has varying shades of gray; slowest transmission
time.
If the receiving fax machine does not have the resolution you select, the
transmission will fall back to the next available resolution on receiving
machine.
Contrast
If your document is very light or very dark, you might want to set the
contrast accordingly. Use S.LIGHT to send a very light document. Use
S.DARK to send a very dark document.
1 Insert the document, face down, in the feeder.
2 Press Function , 3 , 1 .
3 Use or to select AUTO, S.LIGHT or S.DARK and press Set .
ACCEPTED
1.YES 2.NO
OTHER SETTINGS?
4 Press 2 if you are finished choosing settings, and go to Step 5—OR—
Press 1 if you want to select additional settings. The display returns to
the Setup Send menu.
5 Enter a fax number and press Start to send a fax.
To set the contrast for a copy, press Copy in Step 5.
See
Multiple
Resolution
Transmission
p. 40