B&B Electronics Elinx EIR510-2SC-T - Manual (Page 91)

Manual Documentation Number: EIR510-xSFP-T_0708m 83
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Port Base Priority
Configure per port priority level.
„ Port 1 through 10: 4 priority levels – High, Middle, Low, and Lowest.
„ Click
Apply
COS Configuration
Set up the COS priority level.
„ COS priority: Set up the COS priority level 0~7 –High, Middle, Low,
Lowest.
„ Click Apply .
TOS Configuration
„ TOS priority: the system provides 0 to 63 TOS priority levels. Each
level has four types of priority – high, middle, low, and lowest. The default
value is ‘Lowest’. When an IP packet is received, the system will check the
TOS level value in the IP packet. For example, if the TOS level 25 is high
and the port is following the TOS priority policy only, when a packet is
received, the system will check the TOS value of the received IP packet. If
the TOS value of received IP packet is 25(priority = high), then the packet
will have highest priority.
„ Click
Apply .