Belkin 5216K User Manual
Page 24
21
OmniViewIP 5216K/5232K
sections
table of contents
1
2
4
5
6
3
Web InTeRfaCe
administration > server name edit
Give the servers connected to the Switch unique names, so that users
accessing the system can identify the servers easily.
To do so:
1.
From the menu, click “Server Name Edit”. The Switch Configuration
window appears (see Figure 17).
2.
In the “Server Name” section, change the name of the connected
servers by selecting the server name and typing a new name. Click
to save changes.
administration > serial settings
Where you have a serial device connected to the system, you must
configure the serial (RS232) settings.
To do so:
From the menu, click “Serial Settings”. The Serial Settings page will
appear (see Figure 18).
Figure 17 Switch Configuration
Figure 18 Serial Settings
For each serial device connected, type a device name and choose the
correct device parameters.