Belkin 5216K User Manual
Page 40
37
OmniViewIP 5216K/5232K
sections
table of contents
1
2
3
5
6
4
ReMOTe aCCess
advanced – Mouse emulation
Click
and the “Mouse Emulation” dialog box appears (see
Figure 33).
Figure 33 Mouse Emulation dialog box
Figure 34 Mouse Emulation dialog box for use with touch pads
Press “OK” to save settings.
note:
This “Mouse Emulation” setting is used to determine the correct reset
sequence for a local mouse. Setting it incorrectly may lead to a jumpy or
non-operational local console mouse after a remote user disconnects it
from the Switch.
Max Rate - This defines the maximum mouse report rate. For Sun
Solaris, the default value is 20 in order to support older Sun versions.
If a 2-button mouse (older mice without wheel capability, most of the
touch pads, trackballs, or integrated keyboards with mice used in most
of the rack drawers) is connected to the local KVM port of the Switch,
set the “Mouse Emulation” to “Standard Mouse” (see Figure 34).