Belkin 5216K - Manual (Page 25)

22
OmniViewIP 5216K/5232K
sections
table of contents 1 2 4 5 6 3
Web InTeRfaCe
administration > server access list
By default, access is allowed to all servers for administrators. For other
users, define the access rights of each user separately.
To do so:
1. From the menu, click “Server Access List”. The Access List
Configuration window will appear (see Figure 19).
2. Select a user from the user drop-down menu.
3. Check the target servers the user can access (according to his or
her access permissions). To select all target servers, click
.
4. Click to save the selection.
5. Repeat the steps above for additional users.
Figure 19 Server Access List Configuration