Brother MFC-253CW - Manual (Page 153)

Menu and Features
143
C
Main Menu Submenu Menu Selections Options Descriptions Page
6.Print
Reports 1.XMIT Verify — — Prints a Transmission
Verification Report for
your last transmission. 55
2.Help List — — Prints the Help List so you
can see at-a-glance how
to quickly program your
machine. 55
3.Quick Dial — — Lists name and numbers
stored in the Speed Dial
memory, in numerical
order. 55
4.Fax Journal — — Lists information about the
last incoming and
outgoing faxes.
(TX means Transmit.)
(RX means Receive.) 55
5.User
Settings — — Lists your settings. 55
6.Network
Config — — Lists your Network
settings. 55
7.Machine Info. 1.Serial No. — — Lets you check the serial
number of your machine. 127
8.Ink
Management 1.Test Print — Print Quality
Alignment
Lets you check the print
quality or alignment. 125
2.Cleaning — Black
Color
All
Lets you clean the print
head. 125
3.Ink Volume — — Lets you check the
available ink volume. 127
0.Initial
Setup 1.Receive Mode — Fax Only*
Fax/Tel
External TAD
Manual
Choose the Receive
mode that best suits your
needs. 34
2.Date&Time — — Puts the date and time on
the LCD and in headings
of faxes you send. See
Quick
Setup
Guide.
3.Station ID — Fax:
Name:
Set your name and fax
number to appear on each
page you fax.
4.Tone/Pulse
(Not Available in
New Zealand)
— Tone*
Pulse
Choose the dialling mode.
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.