Brother FAX2820 - Manual (Page 25)

Chapter 1
1 - 7
Load document
You can send a fax, make copies, and scan
from the ADF (automatic document feeder).
Note
The Scan feature is not available for
FAX-2820 and FAX-2920.
Using the automatic
document feeder (ADF)
FAX-2820 and MFC-7220:
The ADF can hold up to 20 pages, feeding
each one individually through the machine.
Use standard 20 lb (80 g/m
2 ) paper and
always fan the pages before putting them in
the ADF.
FAX-2920 and MFC-7225N:
The ADF can hold up to 30 pages, if you
stagger the pages and meet the following
conditions:
Temperature: 68° F - 86° F (20° - 30°C)
Humidity: 50% - 70%
Paper: Xerox 4200 or Xerox 4024
(20 lb/Letter)
■
Make sure documents written with ink are
completely dry.
■
Documents to be faxed must be from 5.8
to 8.5 in. (147.3 to 215.9 mm) wide and
3.9 to 14 in. (100 to 356 mm) long.
1
Pull out the ADF document support.
2
Fan the pages well. Make sure you put
the documents face down, top edge
first in the ADF until you feel them touch
the feed roller.
3
Adjust the paper guides to fit the width of
your documents.
CAUTION
■
DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled,
paper-clipped, pasted or taped.
■
DO NOT use cardboard, newspaper or
fabric.
CAUTION
DO NOT pull on the document while it is
feeding.