Belkin F5D5230-4 - Manual (Page 14)

Step 2
12
2. Connect a network cable between each of your PCs and the
Gateway Router
Plug a Network cable into the Ethernet port on each of the other PCs
and then to one of the ports on the rear of the Gateway Router
labeled LAN.
Note: It does not matter which LAN ports you connect your other
PCs to, but be sure that you are not connecting any of the PCs
to the port labeled WAN.
3. Connect a Network Cable between the Router and your Cable or
DSL modem.
Plug a cable into the port labeled WAN on the Belkin Gateway
Router and connect the other end of the cable to the Cable or DSL
modem’s Ethernet port.
NIC NIC NIC NIC NIC NIC NIC NIC
CONNECT TO
WAN PORT
CABLE OR DSL
MODEM
CONNECT TO
LAN PORTS
BELKIN
ROUTER