Belkin F5D5230-4 - Manual (Page 37)

35
Step 4
Services
LAN DHCP Settings
Click on "LAN Services" to access this screen. Your Belkin 4-Port
Cable/DSL Gateway Router allows you to specify an internal IP
address. You may also turn the DHCP service on and off. We
recommend using DHCP service for the easiest setup of your
network. Making changes to this screen will require you to
re-configure your networked PCs.
NAT Enable/Disable
Network Address Translation (NAT) is used for security by making
your internal network invisible to the Internet. We recommend that
you leave NAT enabled for security reasons.