Black Box ASTCKEY - Manual (Page 74)

Auto-Sync Time Clock
5-10 724-746-5500 | blackbox.com
4. Once you have located the original configuration file, click on the now active
button to download the clock configuration file to the selected
clock(s).
NOTE: It is recommended to perform a Backup from the built-in clock Backup
Utility before performing any clock firmware updates. FAILURE to do this
could result in loss of clock configuration and/or the transaction database!
NOTE: If updating clock firmware, click on the button after browsing
to and selecting a clock firmware file. ONLY PERFORM this function if Black
Box recommended. When performing a firmware update, the file would
have an “image.bin” name and probably be stored in a different location.
Otherwise, this function is not normally used.
Manual Discovery Procedure for download:
1. With the Advanced options  Download open, click on View  Advanced
options  Manual discovery to enter the IP Address for the desired clock, and
press the button to add the clock to the list of Auto-Sync Time Clocks
(see Figure 5-13). Use this same procedure to manually add other Auto-Sync
Time Clocks to the list.
Figure 5-13. Manual Discovery Download.
2. Browse to select the clock “ATVSConfig.bin”” file using the Windows Open dialog
(see Figure 5-12).
3. Click on the button to download the clock configuration file to
the selected clock(s) in the list that was manually created. Click “Select All
Clocks” (the default) to select/deselect all discovered clocks, or click on each
desired clock.
Operation status displayed here