Philips Lumea Essential IPL Haarentfernungssystem User Manual

Page 14

Advertising
background image

- Tanning with artificial light

Follow the instructions in ‘Sun exposure before treatment’ and

‘Sun exposure after treatment’ above.

- Tanning with creams

If you have used an artificial tanning lotion, wait until the artificial tan has

fully disappeared before you use Philips Lumea Essential.
Note: For more details on unwanted skin reactions, see chapter ‘Using the

appliance’, section ‘Possible side effects and skin reactions’.

Using the appliance

Check the recommended light intensities table in chapter ‘Preparing for

use’, section ‘Light intensity’ to determine which light intensities are most

suitable for your skin and body hair colour.

Shave the area you intend to treat before you use the appliance (see

chapter ‘Preparing for use’, section ‘Preparing treatment areas’).
If the treatment becomes painful at any point in time, reduce the 

light intensity setting until the treatment is comfortable again. If you 

notice skin reactions stronger than slight redness, stop the treatment

immediately and read section ‘Possible side effects and skin reactions’ in 

this chapter.
First use and skin test
When you use the appliance for the first time or after recent tanning, we

advise you to perform a skin test on each area to be treated to check

your skin’s reaction to the treatment and to get accustomed to light-based

treatment.

1

Choose an area close to the area you intend to treat.

2

 Insert the small plug into the appliance and put the adapter in the 

wall socket.

Note: Make sure the body attachment is placed on the appliance.

3

 Press the on/off button to switch on the appliance.

, Intensity light 1 goes on.
Note: The appliance always automatically selects the lowest light intensity

setting. See section ‘Light intensity’ in chapter ‘Preparing for use’ to determine

the appropriate light intensity.

4

 To adjust the light intensity setting, press the on/off button one 

or more times until you have reached the required setting. The 

corresponding intensity light lights up.

ENGLISH

14

Advertising