Philips Lumea Essential IPL Haarentfernungssystem User Manual

Page 9

Advertising
background image

To prevent damage

- Make sure nothing obstructs the air flow through the ventilation slots.

- Never subject the appliance to heavy shocks and do not shake or drop it.

- If you take the appliance from a very cold environment to a very warm

environment or vice versa, wait approximately 3 hours before you use it.

- Store the appliance in the pouch supplied so that it does not become

dusty.

- Never leave the appliance unattended when it is switched on. Always

switch off the appliance after use.

- Do not expose the appliance to direct sunlight or UV light for several

hours, to prevent damage.

- Do not flash against any other surface than the skin. This can cause

severe damage to the body attachment and/or the light exit window.

Only flash when the appliance is in contact with skin.

Caution

- Never use the appliance around the eyes and near the eyebrows to

avoid the risk of eye damage.

- Use this appliance only at settings suitable for your skin type (see the

table in section ‘Recommended light intensities’ of chapter ‘Preparing

for use’). Use at higher settings than those recommended can increase

the risk of skin reactions and side effects.

- This appliance is only intended for removing unwanted human body

hair from areas below the neckline. Do not use it for any other purpose.

- Make sure the skin in the area to be treated is clean, dry and free from

creams, lotions and other cosmetics. If the skin is not clean and dry, the

integrated safety system may not work as intended and the appliance

may not flash or may flash unintentionally.

Keep the following things in mind to avoid compromising the

lifetime of your Philips Lumea Essential:

- Do not expose the appliance to ambient temperatures lower than

15°C or higher than 35°C during use.

- The appliance is equipped with a built-in overheat protection. If the

appliance overheats, it does not flash. Do not switch off the appliance,

but let it cool down for approx. 15 minutes before you continue with

your treatment. After 5 minutes the appliance switches off automatically.

Then let it cool down for another 10 minutes.

- Always return the appliance to a service centre authorised by Philips

for examination or repair. Repair by unqualified people could cause an

extremely hazardous situation for the user.

- Do not use the appliance if any of the situations mentioned in section

‘Contraindications’ apply to you.

Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and

regulationsregarding exposure to electromagnetic fields.

ENGLISH

9

Advertising