Binatone ACTION 950 - Manual

USER GUIDE
Private mobile radio with twin charger
1. LCD Screen
Antenna
LCD Screen
- Displays the
current channel
selection and other
radio symbols.
PTT (PUSH to
TALK) button
–Press and hold to
transmit. CALL button
-Press to send
Ringing tone to
other PMR units.
MENU Button
-Press to switch
between Modes.
Speaker
Ear/Mic/Charge
jack
PWR/VOL Switch
– Rotate clockwise/
counter clockwise
to turn
ON or OFF, and
adjust the volume.
MIC (Microp hone)
UP/DOWN
Buttons –
Press to change
channels, volume,
and to select
settings during
programming.
the unit
Channel Number. Changes from 1 to
8 as selected by the user.
Digital Code. Changes from 1 to 83
as selected by the user.
Displays the Battery charge level.
When the bars are reduced, the
battery needs recharging.
TX Displayed when transmitting a signal.
RX Displayed when receiving a signal.
DCS Displayed when the Digital Code System is turned On.
VOX Displayed when the VOX feature is enabled.
SCAN Displays when the PMR is scanning all channels.
Displayed when the Key Lock feature is activated.
Displayed when a CTCSS sub-channel is turned on.
Displays when the call signal is ON.
Displays when the vibrator function is activated.
2.1 Removing the Belt Clip
Action 950
CTCSS Code. Changes from 1 to 38
as selected by the user.
Displayed when the Dual Watch function is turned ON. DCM
CTCSS
Receiver (LED)
Lights up when you
are receiving signals
Transmit (LED)