Binatone ACTION 950 - Manual (Page 10)

11. Troubleshooting Guide
Symptom Solution
No power.
The may be weak. battery
Check if the batteries are installed properly.
Reception
is weak. The receiving signal may be weak and/or out of range.
Cannot change
CTCSS sub-
channels.
Range is limited.
Wearing the radio close to the body, such as in a pocket or on a
belt, will decrease range; change the location of the radio.
limit the range significantly.
Open fields provide the maximum range, while steel/concrete
structures, heavy foliage, and use in buildings and in vehicles may
The maximum range will vary depending on terrain and environment.
Replace with new if the charge level indicator gets low. batteries
Batteries may be weak.
Sound distortion
problems.
Radios too far apart. Obstacles interfere with transmission. Talk
range is up to 10kms in clear unobstructed conditions.
Radios too close. Radios must be at least 2 metres apart; increase
your distance.
If you are transmitting, speak in a normal tone of voice, 5 cm
away from the
(microphone.). MIC
If you are receiving, lower the volume to a comfortable level.
Key lock mode must be deactivated if the Key lock icon ( ) is
displayed on the LCD Screen.
Press the or button to change the CTCSS sub-channel. UP DOWN
To change CTCSS sub-channels, press the button twice, the
CTCSS sub-channel number flashes on the LCD Screen.
MENU
Batteries may be weak.
Replace the old batteries with new ones.
No
communication Check the Channel and the CTCSS code setting. Both the
Transmitting and Receiving PM R units should be tuned to
See the “Effective Range” diagram.
If this happens, press the and buttons at the same
time to activate the Monitor function.
MENU DOWN
UK(BTP) Ver 3 Aug 09
For Evaluation Only.
Copyright (c) by Foxit Software Company, 2004
Edited by Foxit PDF Editor
BINATONE TELECOM PLC
1 Apsley Way London NW2 7HF,United Kingdom.
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877
e-mail: [email protected]
k ________________________________________ .
EC Declaration of Conformity
We the manufacturer / Importer : Binatone Telecom Plc
1
Apsley Way London
NW2 7HF, United Kingdom.
Declare under our sole responsibility that the following product
Type of equipment: Private Mobile Radio
Model Name: Action 950 Series
Country of Origin: China
Brand: Binatone
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Council Directive 2004/108/EC on the approximation of
the laws of the Member States relating to electromagnetic compatibility (EMC) and the
European Community Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:
EMC:
Electrical Safety:
The product is labelled with the European Approval Marking CE as show. Any Unauthorized
modification of the product voids this Declaration.
Manufacturer / Importer
(signature of authorized person)
London,
Signature: Place & Date: 8th Nov, 2008
EN 60065-1:2006
EN 301 489 -5 V1.3.1:(2002-08)
EN 300 296 -2 V1.1.1:(2001-03)
EN 301 489 -1 V1.6.1:(2005-09)
Waste electrical products must not be
disposed of with household waste.
This equipment should be taken to
your local recycling centre for safe
treatment.
Turn
the
PWR/VOL button to increase the receiver volume level.
the same Channel and CTCSS code (if applicable).