Billion Electric Company 7202 - Manual (Page 90)

Step 6: Double-click on the icon to display your current Internet connection status.
Web Configurator Easy Access
With UPnP, you can access web-based configuration for the myGuard 7202(G) without first
finding out the IP address of the router. This helps if you do not know the router’s IP address.
Follow the steps below to access web configuration.
Step 1: Click Start and then Control Panel.
Step 2: Double-click Network Connections.
Step 3: Select My Network Places under Other Places.
Step 4: An icon describing each UPnP-enabled device shows under Local Network.
Step 5: Right-click on the icon of your myGuard 7202(G) and select Invoke. The web
configuration login screen displays.
Step 6: Right-click on the icon of your myGuard 7202(G) and select Properties. A properties
window displays basic information about the myGuard 7202(G).
88