Brother PR-600 - Manual (Page 134)

Selecting an Embroidery Pattern 115
5
4
Select an embroidery pattern.
Touch the key for the desired pattern.
X The selected pattern appears in the pattern
display area.
1 Touch this key to delete the selected pattern.
• If the wrong pattern was selected or you
wish to select a different pattern, touch the
key for the desired pattern.
■ Deleting embroidery data
From this screen, the embroidery data stored on
the CompactFlash card can be organized by
deleting unnecessary data.
After selecting the pattern that you wish to delete,
touch to display the screen shown below.
1 Deletes the data, then returns to the data with no
pattern selected
2 Does not delete the data, then returns to the data
before was touched
Note
● To delete the CompactFlash card pattern
data, delete it from the PR-600.
5
Touch .
This confirms the pattern selection.
X The pattern editing screen appears.
Sapphire.book Page 115 Friday, August 1, 2003 9:12 AM