Brother PR-600 - Manual (Page 36)

Basic Procedures 17
2
Basic Procedures
Basic embroidering procedures are described below.
Check the overall procedure below, before operating the embroidery machine.
(Example) Embroidery pattern The operations to embroider the pattern shown at the left are described on
the following pages.
Although embroidering can continue without the pattern being edited or
embroidering settings being specified, refer to page 118 for details on
editing the patterns, and refer to page 85 for details on specifying
embroidering settings.
Descriptions of the keys and other information that appear in the main LCD
screens are provided in the tables on pages 48 to 56. Use these tables for
quick reference.
The various operating precautions that must be observed
during the basic procedures are provided on pages 14 to 16.
These precautions must be strictly observed in order for the
machine to function properly. Make sure to read these
precautions.
Procedure Operation
Tutorial
Reference
Page
Operating
Procedure
Reference
Page
1 Install the bobbin. p. 18 p.15
2 Turn on the machine. p. 20 p.14, 16
3 Select an embroidery pattern. p. 23
4 Edit the embroidery pattern. p. 25
5 Specify the embroidering settings. p. 26
6 Check the previewed image. p. 27
7 Hooping the fabric in the embroidery frame. p. 28 p. 16
8 Attach the embroidery frame to the machine. p. 30
9 Check the embroidery area. p. 32
10 Thread the upper threads. p. 33 p.15
11
Press the start/stop button to start embroidering.
(Once embroidering is completed, the machine automatically
stops.)
p. 41
12 Check the thread tension. p. 44
13
Remove the embroidery frame, and then remove the fabric from
the frame.
p. 45
14 Turn off the machine. p. 46
Sapphire.book Page 17 Friday, August 1, 2003 9:12 AM