Brother DCP-J125 - Manual (Page 64)

50
Menu ( ) (continued)
C
General Setup
(Continued)
LCD Settings LCD Contrast Adjusts the contrast of
the LCD.
See
1
.
Backlight Light*
Med
Dark
You can adjust the
brightness of the LCD
backlight.
Dim Timer Off
10Secs
20Secs
30Secs*
You can set how long the
LCD backlight stays on
after you go back to the
Ready screen.
Sleep Mode — 1Min
2Mins
3Mins
5Mins*
10Mins
30Mins
60Mins
You can choose how
long the machine must
be idle before it goes into
sleep mode.
Level1 Level2 Level3 Options Descriptions Page
Print Reports Help List — — You can print these lists
and reports. See 1 .
User Settings — —
Machine Info. Serial No. — — Lets you check the serial
number of your machine. 47
Initial Setup Date&Time — — Puts the date and time in
your machine.
See 2 .
Reset All Settings — Resets all the machine’s
settings back to the
settings that were set at
the factory. 47
Local Language — English*
Spanish
Allows you to change the
LCD language.
See 1 .
1
See Advanced User’s Guide.
2 See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.
Level1 Level2 Level3 Options Descriptions Page
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.