BUSH 1080P - Manual (Page 14)

BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105 P.13
03 Getting Started
Press
E
OK button to access the card menu. Refer to
the module instruction manual for setting details.
When module is removed, the following message
F
will appear on the screen.
Software Update function
When you get the updating news from the TV shop’s t
web, you can update the operating software using
the Download menu. The data for various units are
transferred consecutively on a special receiving
channel.
You need to search the channel with updating code t
stream.
Note
You can get information from the TV shop or O
internet.
Operation
Press
A
MENU button.
Press
B
 button to select TUNING menu, press 
button to enter.
Press
C
 button to select Software Upgrade item.
Press
D
 button to set it as On. (The default is Off )
The Start Upgrade item can be selected.(The default
E
is grey and cannot be selected).
13%
Press EXIT to cancel download
Press
F
 button to select the Start Upgrade
option and use OK button to enter. Then the TV will
restart and search the upgrade information.
Note
If the upgrade information is received, the TV will O
begin to upgrade. Or else, the TV will be back the
DTV source.
Load the receiver identification. This process may
G
also take several minutes. You can press EXIT button
to cancel the download and your TV set will be back
the DTV source.
100%
15%
Press EXIT to cancel download
Updating in progress - Do not turn off the TV