Electrical connections – BUSH 1080P User Manual

Page 5

Advertising
background image

P.04 BUSH | 1080p Digital LED LCD | User Manual | Helpline: 0845 604 0105

ELECTRICAL CONNECTIONS

CONNECTING TO POWER

Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a

13A plug complying with BS1363. If this plug is unsuitable or needs to be replaced, please note the following:

PLUG REPLACEMENT

If you need to replace the fitted plug:

WARNING

Never connect live or neutral wires to the earth terminal of the

plug. Only fit an approved 13 Amp BS1363/A plug and the correct

rated fuse. If in doubt, consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured as follows:

Blue

Neutral

Brown

Live

As the colours of the wires in the mains lead of this apparatus may not correspond

with the coloured markings identifying the terminals in your plug, proceed

as follows:

The wire which is coloured blue must be connected to the terminal, which is marked with N or coloured blue. The

wire which is coloured brown must be connected to the terminal which is marked L or coloured brown. The green

and yellow wire must be connecting to the terminal marked with the letter E or the earth symbol . Always ensure

that the plug cord grip is fastened correctly.

If a 13A (BS1363) fused plug is used it must be fitted with a 3A fuse conforming to BS1362 and be ASTA approved. If

in doubt contact a qualified electrician.

WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH

HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK

WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.

TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is

incorporated under license from SRS Labs, Inc.

TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog from only

two speakers.

Advertising