Blaupunkt HEIDELBERG CD50 - Manual (Page 12)

37
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
Adjusting seek tuning sensitivity
It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“SENS” appears in the display.
➮
Press
:
.
The currently selected setting will ap-
pear in the display. “SENS HI6” indicates
the highest level of sensitivity, “SENS
LO1” the lowest. If you select “SENS
LO”, “lo” will light up in the display.
➮
Press
:
to select the desired
sensitivity.
➮
Once you have made your selec-
tion, press MENU
8
or OK
;
.
Storing radio stations
Storing radio stations manually
➮
Select the desired memory bank
FM1, FM2, FMT or either MW or
LW.
➮
Tune the radio into the desired sta-
tion.
➮
Press and hold down one of the
station preset buttons 1 to 6
>
on
which you want to store the radio
station for longer than two seconds.
Storing radio stations
automatically (TravelStore)
You can automatically store the six ra-
dio stations with the strongest reception
in your current reception area (for FM
only). These stations will be stored in
the FMT memory bank.
Note:
Any stations stored previously in the
memory bank will be deleted.
➮
Press and hold down BND / TS
5
for longer than two seconds.
The storing process will begin.
“TRAVEL-STORE” will appear in the
display. After the stations have been
stored, the radio will automatically be-
gin to play the station stored on preset
button 1 for the FMT memory bank.
Recalling stored radio stations
➮
Select the desired station memory
bank.
➮
Press the station button 1 to 6
>
on which you have stored the de-
sired radio station.
RADIO OPERATION