Blaupunkt HEIDELBERG CD50 - Manual (Page 13)

38
Scanning the radio stations
within reception range (SCAN)
You can scan all of the radio stations
currently within your reception range.
The scan time can be set in the menu
to play from five to 30 seconds.
Starting SCAN
➮
Press and hold down OK
;
for
longer than two seconds.
SCAN will begin. “SCAN” will appear
briefly in the display, followed by the
flashing station name or frequency of
the radio station currently being
scanned.
Stopping the SCAN function,
continuing to listen to the radio
station scanned
➮
Press OK
;
.
SCAN will end and the last station
scanned will continue playing.
Adjusting the scan time
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“SCANTIME” appears in the dis-
play.
➮
Press
:
to set the scan time
as desired.
➮
Once you have made your selec-
tion, press MENU
8
or OK
;
.
Note:
The scan time selected also applies to
the SCAN function for theCD player and
the CD changer operation.
Program Type (PTY)
In addition to the radio station name, a
number of FM stations transmit informa-
tion on the type of program they broad-
cast. This car radio has been equipped
to receive and display this information.
These program types can include:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
Using the PTY function, you can select
the radio station according to the type
of program being broadcast.
As soon as the radio registers a radio
station broadcasting the program type
selected, it will automatically switch from
the station playing or from the CD play-
er or CD changer mode to that station.
Switching PTY on/off
➮
Press MENU
8
.
➮
Press
:
repeatedly until “PTY
ON” or “PTY OFF” appears in the
display.
➮
Press or
:
to switch this
function either on or off.
PTY will light up in the display when this
function has been activated.
➮
Press MENU
8
or OK
;
.
Selecting the program type and
starting seek tuning
➮
Press or
:
.
The currently selected program type will
appear in the display.
RADIO OPERATION