Blaupunkt HEIDELBERG CD50 - Manual (Page 14)

39
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
➮
If you would like to select a different
program type, press or
:
while the program type is on dis-
play to switch to another program
type.
OR
➮
Press one of the station preset but-
tons from 1 to 6
>
to select the
program type stored on that partic-
ular station button.
The program type selected will appear
briefly in the display.
➮
Press or
:
to start seek tun-
ing.
The next radio station broadcasting the
program selected will begin to play.
Note:
If the radio is not able to find a station
broadcasting the program type select-
ed, you will hear a beep and “NO PTY”
will appear briefly in the display. The sta-
tion selected previously will then resume
play.
Storing the program types on the
station preset buttons
➮
Press or
:
to select the pro-
gram type.
➮
Press the desired station preset
button 1 to 6
>
for longer than two
seconds.
The program type selected will then be
stored on the station preset button 1 to
6
>
pressed.
Optimising radio reception
Interference-related treble cut
(HICUT)
The HICUT function improves reception
when reception begins to deteriorate. If
interference occurs, then the treble and
the noise is cut automatically.
Switching HICUT on/off
➮
Press MENU
8
.
➮
Press
:
repeatedly until “HI-
CUT” appears in the display.
➮
Press or
:
to switch HICUT
on or off.
“HICUT 0” indicates that the function is
switched off; when “HICUT 3” appears,
the treble will be automatically cut as
far as possible.
➮
Press MENU
8
or OK
;
.
Interference-dependent bandwidth
switching (SHARX)
The SHARX function allows you to vir-
tually eliminate interference from neigh-
bouring radio stations. When you are in
a reception area with a large number of
radio station signals, switch the SHARX
function on.
Switching SHARX on/off
➮
Press MENU
8
.
➮
Press
:
repeatedly until
“SHARX” appears in the display.
➮
Press or
:
to switch SHARX
on or off.
RADIO OPERATION