Beko 22WLP530HID - Manual (Page 17)

15
6.4.3-Fine Tuning
If the channel you found is not of
the desired quality and requires Fine
Tuning, then select the FINE TUNE
tab by pressing the Down movement
button in the Setup menu. Using
the Left/Right movement buttons
on your remote control, adjust the
broadcast displayed on the screen to your
desired quality. Under normal circumstances,
you will not require to use the Fine Tune
function. The AFC values of your television
will automatically adjust and lock themselves
to the channel. However, you might need
it in case the television transmitters do not
operate according to the standards. To store
in the memory the settings you have made,
select the Store tab and press the Right or
Left movement button.
6.4.4-Program Table
Press the MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program Table menu will be displayed.
Select the system in which you
would like to make the search
from the SYSTEM tab. Move into
CHANNEL tab by pressing the down
movement button. Press OK on
your remote control to select “S” for
cable channels and “C” for channels
received via the antenna. Move onto
the PROGRAM NO tab and using the
number buttons enter the channel number
in which you would like to have the channel
stored. If the broadcast viewed on the screen
is of your desired quality, first move onto the
STORE tab with the down movement button
to store in the memory the selection you have
made and store the channel by pressing
the Left or Right movement buttons. The
prompt STORED will be displayed briefly.
The channel will be stored according to the
program number of your choice. You can
tune and store in memory other channels the
same way. In the event that you wish to exit
the channel settings menu for any reason,
simply press the EXIT button.
6.4.2.2-If you do not know the
channel number
Press the MENU button. Move to
the SETUP menu by pressing the
Down movement button in the Main
Menu and confirm your selection
with the OK button. Setup menu will
be displayed. Select the system in
which you would like to make the
search from the SYSTEM tab. Move
into CHANNEL tab by pressing the
down movement button. Press OK on
your remote control to select “S” for
cable channels and “C” for channels
received via the antenna. Select SEARCH tab
using the Up/Down movement buttons, and
scan the channels in ascending order with
Right movement button and in descending
order with Left movement button. If the
channel that is found is of your liking, select
the STORE tab. Then store it in the memory
by pressing the Right or Left movement
buttons. Repeat the same procedure for other
channels by selecting the program number
of your choice from the PROGRAM NO tab.
If the channel you found is not of the desired
quality and requires Fine Tuning or if you
would like to rename the channel, refer to the
relevant sections.
MENU
PROGRAM TABLE
00 05 10
01 KANAL 06 11
02 KANAL 07 12
03 08 13
04 09 14
SKIP
MOVE
NAME
DELETE
SELECT BACK