Beko 22WLP530HID - Manual (Page 26)

24
9.5-PC connection
Rear view of TV
Picture connection
Sound connection
9.5.1-PC Connection:
Connect the D-Sub15 connector to the PC-IN socket at the back of your television by using
an appropriate cable (not supplied with your television). Again, by using an appropriate cable,
connect the audio output of your PC to the PC AUDIO-IN at the back of your television to
listen to sounds from your PC and you can adjust the volume level of your source by using
VOL+/VOL- buttons.
9.5.2-Transition to the PC mode
For your LCD-TV to switch to the monitor (PC) mode, press the AV button on your remote
control. SOURCE menu will be displayed. Select PC option by pressing the U p/down
movement buttons and press the
OK
button.
9.5.3-PC Setting
Enter into the Setup menu from the main menu by pressing the MENU button in the PC
mode. In order to make the necessary settings in this menu, you can select the tabs with the
up/down buttons on your remote control to make the following relevant settings.
9.5.4-AUTOCONFIGURATION
The most suitable geometric settings in accordance with the entry mode are configured by
this function. For this operation, just select the Autoconfiguration tab and press OK
button.
9.5.5-HORIZONTAL POSITION: Horizontal position setting.
9.5.6-VERTICAL POSITION: Vertical position setting.
9.5.7-CLOCK FREQUENCY: This is the pixel clock frequency. User can narrow down or
enlarge the display by selecting a desired value.
9.5.8-PHASE: Using the right/left movement buttons, you can ensure that the colors and
shapes are exactly consolidated on the PC image.
9.5.9-PICTURE FORMAT
You can select the PC image to be displayed in 16:9 or 4:3 formats.