Important safety instructions – Beko 22WLP530HID User Manual
Page 5
3
MANUAL
3
This symbol is used to warn the user about the “dangerous voltage” contained
inside the TV that may create a risk of electrical shock.
This symbol is used to remind the user important usage and service instructions
supplied with the TV
Important Safety Instructions
• Never install the TV into closed places
such as bookcases or cabinets unless
adequate ventilation is provided.
1) Please READ the operating
instructions before using
the TV for the first time.
2) Please observe the
instructions contained in
the Operating Instructions.
3) Please consider all warnings.
4) MAKE SURE that all
power connections
(extension cables and the
connections between the
TV components) have been
made properly and in accordance with
the manufacturer’s instructions. Before
making or changing the connections,
power off the TV and unplug the mains
connection plug.
5) If you have any doubts regarding the
installation, operation or safety of the
device, please
REFER to the retailer.
6) BE CAREFUL with glass panels and
covers on the TV. The screen glass
may break and cause serious injuries if
something hits it.
7) To ensure adequate ventilation, please
leave a clearance area of at least 10 cm
around the television. This clearance
prevents the TV from overheating and
consequently causing damage.
• Using the TV in dusty environments
should also be avoided.
• Never block the slots and openings by
placing the TV on a bed, sofa, pillow or
other similar surfaces.
8) DO NOT COVER the
ventilation openings
of the TV with items
such as newspapers,
table-clothes, curtains,
etc. Overheating causes damage and
shortens the service life of the TV
9) Your TV may be damaged
if you place it under direct
sunshine or close to a
heater. Please abstain
from using the TV in very
hot or humid locations or in places where
the temperature is likely to decrease
below 5°C (41°F).
DO NOT PLACE on
or near the TV any hot objects or items
with open flame such as candles or any
night lamps. The high temperature can
melt plastic parts and cause a fire.