Philips NP2500-37 - Manual (Page 11)

10
Connect AC power
Caution
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
1
Connect NP2500 to the power supply.
2
Continue with the steps in chapter First-
time setup.
Note
The type plate information is located at the •
back or at the underside of the product.
4 Connect
Connect sound system
You can play music from an external appliance
that is connected to the red and white LINE
OUT jacks of NP2500.
1
Consult the user manual of the external
appliance to connect the supplied red and
white cable to the auxiliary input jacks of
the external appliance.
2
Connect the other end of the red and
white cable to the LINE OUT L / R jacks
of NP2500.
3
On the external sound system, set the
source to AUX (auxiliary).
4
Operate the controls of the external
appliance to play music.
EN