Philips NP2500-37 - Manual (Page 31)

30
Language
This is how you can change the language of the
display:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Language].
3
Select a menu option and confirm.
The display language changes to the »
new setting.
Press
» BACK to go back to the
previous screen.
Press
» HOME to go to the Home
menu.
Register NP2500
Registration of NP2500 requires a valid email
address and mailbox access.
This is how to navigate and select with the
remote control:
Press • or to select a menu option.
Press • OK to confirm a selection.
Press • BACK to go back to the
previous screen.
Press • HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
To select a number or an alphanumeric •
character, press a button once or
repeatedly until you see the number or
alphabetic character in the display of
NP2500.
To cycle through the alphanumeric •
characters that are available, press a
button repeatedly.
To delete the last character entry from •
the display, press CLEAR.
To delete the whole last line entry •
from the display, press and hold
CLEAR.
onscreen prompts for advanced
configurations that are not described
in this manual.
1
Connect an Ethernet cable (sold
separately) to the ETHERNET jack of
NP2500 and the Ethernet jack of the
wired router.
2
Ensure that the wired router is turned on
and has broadband Internet access.
3
Turn on NP2500.
4
Press SETTINGS, to go to the Settings
menu.
5
Select [Wired (Ethernet)] to start the
network setup process.
NP2500 tries to acquire an automatic »
IP address.
Press
» BACK to enter your IP
address manually.
6
Enter your static IP address and confirm.
NP2500 shows the confirmation for »
the connection to the network.
NP2500 shows the prompt for the
»
connection to the Internet.
7
Select [Yes] to connect to the Internet.
NP2500 shows the confirmation for »
the connection to the Internet.
Location and time zone
This is how you can change the location and
time zone settings of NP2500:
1
Press SETTINGS, to go to the Settings
menu.
2
Select [Location and time zone].
3
Select a menu option and confirm.
NP2500 applies the new location and »
time zone settings.
Press
» BACK to go back to the
previous screen.
Press
» HOME to go to the Home
menu.
EN