Philips PPX2340-F7 - Manual (Page 18)

18 Philips · PPX2330 · 2340
7 Settings
1
Switch the device on using the on/off switch on the
side.
2
After the initial screen the main menu appears.
3
Use the navigation keys to select Settings.
4
Confirm with à.
5
Use ¡/¢ to select from the following settings.
6
Confirm with à.
7
Modify the settings using à, ¡/¢,
8
Confirm with à.
The ¿ key takes you one step back in the menu.
Image Settings
Wall paper
—Select background images
Fit Screen
—Convert videos and images original, opti-
mal, zoom mode.
Projection Mode
Front
—Normal projection; the device is located in
front of the projection surface/screen.
Rear
—Rear projection; the device is located behind
the projection surface; the image is horizontal mir-
rored.
Ceiling
—The device is hanging from the ceiling in an
upside-down position; the image is rotated by 180
degrees.
Rear ceiling
—The device is hanging from the ceiling
in an upside-down position behind the projection
surface; the image is rotated by 180 degrees and hor-
izontal mirrored.
Wall color correction
—Colour correction of the pro-
jected image to adjust to coloured projection surfaces
Smart Settings
—Select predefined settings for bright-
ness / contrast / colour saturation. If you modify these
settings, the setting is switched to Manual.
Brightness
—Adjust brightness
Contrast
—Adjust contrast
Saturation
—Adjust colour saturation
Sound Settings:
Volume —Adjust the volume
Key beep
—Turn key tones on and off
Video Settings
View
—Display all videos in a list or a corresponding
folder structure on the drive.
Repeat
—Set the repeat type for video files: Repeat
deactivated (Off), repeat all videos in a directory
(Directory), repeat only the current video (Movie),
repeat all videos (All).
Resume play
—If this function is activated, playback will
continue at the position it was last stopped. If deacti-
vated, playback will always start at the beginning of the
video.
Music Settings
View
—Show all songs in a list or a corresponding folder
structure on the drive.
Screen
—Activate or deactivate the projection during
playback.
Repeat
—Set the repeat type for music files: Repeat
deactivated (Off), repeat all songs in a directory
(Directory), repeat only the current song (Song),
repeat all songs (All).
Shuffle
—Activate this function for random playback.
Otherwise, playback will take place in sequence.
Picture Settings
View
—Display the images as a thumbnail or as a list
during selection in the main menu.
Time per slide
—Image viewing time during slide show
Repeat
—Set the type of repeat for slide show photos:
Repeat off (Off), repeat all photos in the directory
(Directory), repeat all stored photos (All).
Slide transition
—Set image transitions
Slideshow order
—Play slide show in order or ran-
domly
Power Save
Eco mode
—This function reduces the light output in
order to increase the operating time for the built-in bat-
tery. When operating from the power supply, the
energy saving mode is always deactivated in order to
ensure the best-possible image display.
Sleep mode
—With this function, the projector auto-
matically shuts down after a specified period of time or
at the end of a movie.