64 markers – Philips 27PC4326-37 User Manual
Page 64
DVD
6
4 Markers
Marker Setting/Marker Search
You can put marks on your favorite playback points and can
easily call them back later during playback.
●
Before you begin, press SELECT to put the
TV/VCR/DVD in DVD mode. The green DVD light will
appear on the front of the TV/VCR/DVD.
1
During disc playback, press MODE repeatedly
until the Search menu appears in the information bar
at the top of the screen.
2
Press
▲ or ▼ repeatedly until the Marker
information appears in the information bar.
Example: DVD
3
Within
1 minute, press s or B to select a
Marker (
1-10). Make sure _ _ _ _ : _ _ : _ _ appears
beneath the number.
4
Let the disc playback to the point at which you
want to set the Marker (up to 60 seconds away).
When the disc reaches the point you want to
remember, press ENTER. The title or track
number and its elapsed playing time will appear
beneath the markers.
A checkmark will replace the Marker number.
The Marker information will disappear in about
1
minute. Otherwise press RETURN.
5
To search for a specific Marker, repeat steps
1
and 2. Press s or B to choose the Marker you
want. Press ENTER. The playback will start from
the selected point.
• Opening the disc tray,
switching to TV/VCR mode, or
turning off the TV/VCR/DVD
will erase all the Markers.
• To erase a single Marker,
repeat steps
1 and 2. Press
s
or B to select a Marker.
Press CLEAR. Press RETURN
to remove the information
bar.
To erase all the Markers,
select AC (All Clear), then
press ENTER.
1
2
3
4
5
6
7
8
9
0
+10
+100
CLEAR
REC MODE
REC
PLAY
H
G
STOP
RETURN
MODE
SELECT
DISPLAY
CH.
VOL.
MUTE
DISC
SET-UP
MENU
SLOW
PAUSE
TITLE
STANDBY-ON
OPEN/CLOSE
ENTER
PICTURE
/SLEEP
1
Helpful Hints
Example: VideoCD
or Audio CD
Example: DVD
_/17 (SEARCH)
2-5
T3221UB_EN2 4/21/06 4:35 PM Page 64